TypeBuilder.MakeArrayType Metodo

Definizione

Spazio dei nomi:: System.Reflection.Emit

Assembly:: mscorlib.dll

Assembly:: netstandard.dll

Importante

Alcune informazioni sono relative alla release non definitiva del prodotto, che potrebbe subire modifiche significative prima della release definitiva. Microsoft non riconosce alcuna garanzia, espressa o implicita, in merito alle informazioni qui fornite.

Restituisce un Type oggetto che rappresenta una matrice del tipo corrente.

Overload

Nome	Descrizione
MakeArrayType()	Restituisce un Type oggetto che rappresenta una matrice unidimensionale del tipo corrente, con un limite inferiore pari a zero.
MakeArrayType(Int32)	Restituisce un Type oggetto che rappresenta una matrice del tipo corrente, con il numero specificato di dimensioni.

MakeArrayType()

Restituisce un Type oggetto che rappresenta una matrice unidimensionale del tipo corrente, con un limite inferiore pari a zero.

public:
 override Type ^ MakeArrayType();

public override Type MakeArrayType();

override this.MakeArrayType : unit -> Type

Public Overrides Function MakeArrayType () As Type

Valori restituiti

Type

Oggetto Type che rappresenta un tipo di matrice unidimensionale il cui tipo di elemento è il tipo corrente, con un limite inferiore pari a zero.

Esempio

Nell'esempio di codice seguente viene creato un modulo dinamico, un tipo astratto denominato Samplee un metodo astratto denominato TestMethod. accetta un parametro /> in Visual Basic) di tipo , un puntatore al tipo e una matrice di tipo . Restituisce una matrice bidimensionale di tipo Sample. L'esempio di codice salva il modulo dinamico su disco, in modo da poterlo esaminare con il Ildasm.exe (Disassembler IL).

using System;
using System.Reflection;
using System.Reflection.Emit;
using Microsoft.VisualBasic;

public class Example
{
    public static void Main()
    {
        // Define a dynamic assembly to contain the sample type. The
        // assembly will not be run, but only saved to disk, so
        // AssemblyBuilderAccess.Save is specified.
        //
        AppDomain myDomain = AppDomain.CurrentDomain;
        AssemblyName myAsmName = new AssemblyName("MakeXxxTypeExample");
        AssemblyBuilder myAssembly = myDomain.DefineDynamicAssembly(
            myAsmName,
            AssemblyBuilderAccess.Save);

        // An assembly is made up of executable modules. For a single-
        // module assembly, the module name and file name are the same
        // as the assembly name.
        //
        ModuleBuilder myModule = myAssembly.DefineDynamicModule(
            myAsmName.Name,
            myAsmName.Name + ".dll");

        // Define the sample type.
        TypeBuilder myType = myModule.DefineType(
            "Sample",
            TypeAttributes.Public | TypeAttributes.Abstract);

        // Define a method that takes a ref argument of type Sample,
        // a pointer to type Sample, and an array of Sample objects. The
        // method returns a two-dimensional array of Sample objects.
        //
        // To create this method, you need Type objects that represent the
        // parameter types and the return type. Use the MakeByRefType,
        // MakePointerType, and MakeArrayType methods to create the Type
        // objects.
        //
        Type byRefMyType = myType.MakeByRefType();
        Type pointerMyType = myType.MakePointerType();
        Type arrayMyType = myType.MakeArrayType();
        Type twoDimArrayMyType = myType.MakeArrayType(2);

        // Create the array of parameter types.
        Type[] parameterTypes = {byRefMyType, pointerMyType, arrayMyType};

        // Define the abstract Test method. After you have compiled
        // and run this code example code, you can use ildasm.exe
        // to open MakeXxxTypeExample.dll, examine the Sample type,
        // and verify the parameter types and return type of the
        // TestMethod method.
        //
        MethodBuilder myMethodBuilder = myType.DefineMethod(
            "TestMethod",
            MethodAttributes.Abstract | MethodAttributes.Virtual
                | MethodAttributes.Public,
            twoDimArrayMyType,
            parameterTypes);

        // Create the type and save the assembly. For a single-file
        // assembly, there is only one module to store the manifest
        // information in.
        //
        myType.CreateType();
        myAssembly.Save(myAsmName.Name + ".dll");
    }
}

Imports System.Reflection
Imports System.Reflection.Emit

Public Class Example
    Public Shared Sub Main()
        ' Define a dynamic assembly to contain the sample type. The
        ' assembly will not be run, but only saved to disk, so
        ' AssemblyBuilderAccess.Save is specified.
        '
        Dim myDomain As AppDomain = AppDomain.CurrentDomain
        Dim myAsmName As New AssemblyName("MakeXxxTypeExample")
        Dim myAssembly As AssemblyBuilder = myDomain.DefineDynamicAssembly( _
            myAsmName, _
            AssemblyBuilderAccess.Save)

        ' An assembly is made up of executable modules. For a single-
        ' module assembly, the module name and file name are the same 
        ' as the assembly name. 
        '
        Dim myModule As ModuleBuilder = myAssembly.DefineDynamicModule( _
            myAsmName.Name, _
            myAsmName.Name & ".dll")

        ' Define the sample type.
        Dim myType As TypeBuilder = myModule.DefineType( _
            "Sample", _
            TypeAttributes.Public Or TypeAttributes.Abstract)

        ' Define a method that takes a ByRef argument of type Sample,
        ' a pointer to type Sample, and an array of Sample objects. The
        ' method returns a two-dimensional array of Sample objects.
        '
        ' To create this method, you need Type objects that represent the
        ' parameter types and the return type. Use the MakeByRefType, 
        ' MakePointerType, and MakeArrayType methods to create the Type
        ' objects.
        '
        Dim byRefMyType As Type = myType.MakeByRefType
        Dim pointerMyType As Type = myType.MakePointerType
        Dim arrayMyType As Type = myType.MakeArrayType
        Dim twoDimArrayMyType As Type = myType.MakeArrayType(2)

        ' Create the array of parameter types.
        Dim parameterTypes() As Type = _
            {byRefMyType, pointerMyType, arrayMyType}

        ' Define the abstract Test method. After you have compiled
        ' and run this code example code, you can use ildasm.exe 
        ' to open MakeXxxTypeExample.dll, examine the Sample type,
        ' and verify the parameter types and return type of the
        ' TestMethod method.
        '
        Dim myMethodBuilder As MethodBuilder = myType.DefineMethod( _
            "TestMethod", _
            MethodAttributes.Abstract Or MethodAttributes.Virtual _
                Or MethodAttributes.Public, _
            twoDimArrayMyType, _
            parameterTypes)

        ' Create the type and save the assembly. For a single-file 
        ' assembly, there is only one module to store the manifest 
        ' information in.
        '
        myType.CreateType()
        myAssembly.Save(myAsmName.Name & ".dll")

    End Sub
End Class

Commenti

Il MakeArrayType metodo consente di generare un tipo di matrice con qualsiasi tipo di elemento possibile, inclusi i tipi generici.

Vedi anche

Si applica a

MakeArrayType(Int32)

Restituisce un Type oggetto che rappresenta una matrice del tipo corrente, con il numero specificato di dimensioni.

public:
 override Type ^ MakeArrayType(int rank);

public override Type MakeArrayType(int rank);

override this.MakeArrayType : int -> Type

Public Overrides Function MakeArrayType (rank As Integer) As Type

Parametri

rank: Int32

Numero di dimensioni per la matrice.

Valori restituiti

Type

Oggetto Type che rappresenta una matrice unidimensionale del tipo corrente.

Eccezioni

IndexOutOfRangeException

rank non è una dimensione di matrice valida.

Esempio

using System;
using System.Reflection;
using System.Reflection.Emit;
using Microsoft.VisualBasic;

public class Example
{
    public static void Main()
    {
        // Define a dynamic assembly to contain the sample type. The
        // assembly will not be run, but only saved to disk, so
        // AssemblyBuilderAccess.Save is specified.
        //
        AppDomain myDomain = AppDomain.CurrentDomain;
        AssemblyName myAsmName = new AssemblyName("MakeXxxTypeExample");
        AssemblyBuilder myAssembly = myDomain.DefineDynamicAssembly(
            myAsmName,
            AssemblyBuilderAccess.Save);

        // An assembly is made up of executable modules. For a single-
        // module assembly, the module name and file name are the same
        // as the assembly name.
        //
        ModuleBuilder myModule = myAssembly.DefineDynamicModule(
            myAsmName.Name,
            myAsmName.Name + ".dll");

        // Define the sample type.
        TypeBuilder myType = myModule.DefineType(
            "Sample",
            TypeAttributes.Public | TypeAttributes.Abstract);

        // Define a method that takes a ref argument of type Sample,
        // a pointer to type Sample, and an array of Sample objects. The
        // method returns a two-dimensional array of Sample objects.
        //
        // To create this method, you need Type objects that represent the
        // parameter types and the return type. Use the MakeByRefType,
        // MakePointerType, and MakeArrayType methods to create the Type
        // objects.
        //
        Type byRefMyType = myType.MakeByRefType();
        Type pointerMyType = myType.MakePointerType();
        Type arrayMyType = myType.MakeArrayType();
        Type twoDimArrayMyType = myType.MakeArrayType(2);

        // Create the array of parameter types.
        Type[] parameterTypes = {byRefMyType, pointerMyType, arrayMyType};

        // Define the abstract Test method. After you have compiled
        // and run this code example code, you can use ildasm.exe
        // to open MakeXxxTypeExample.dll, examine the Sample type,
        // and verify the parameter types and return type of the
        // TestMethod method.
        //
        MethodBuilder myMethodBuilder = myType.DefineMethod(
            "TestMethod",
            MethodAttributes.Abstract | MethodAttributes.Virtual
                | MethodAttributes.Public,
            twoDimArrayMyType,
            parameterTypes);

        // Create the type and save the assembly. For a single-file
        // assembly, there is only one module to store the manifest
        // information in.
        //
        myType.CreateType();
        myAssembly.Save(myAsmName.Name + ".dll");
    }
}

Imports System.Reflection
Imports System.Reflection.Emit

Public Class Example
    Public Shared Sub Main()
        ' Define a dynamic assembly to contain the sample type. The
        ' assembly will not be run, but only saved to disk, so
        ' AssemblyBuilderAccess.Save is specified.
        '
        Dim myDomain As AppDomain = AppDomain.CurrentDomain
        Dim myAsmName As New AssemblyName("MakeXxxTypeExample")
        Dim myAssembly As AssemblyBuilder = myDomain.DefineDynamicAssembly( _
            myAsmName, _
            AssemblyBuilderAccess.Save)

        ' An assembly is made up of executable modules. For a single-
        ' module assembly, the module name and file name are the same 
        ' as the assembly name. 
        '
        Dim myModule As ModuleBuilder = myAssembly.DefineDynamicModule( _
            myAsmName.Name, _
            myAsmName.Name & ".dll")

        ' Define the sample type.
        Dim myType As TypeBuilder = myModule.DefineType( _
            "Sample", _
            TypeAttributes.Public Or TypeAttributes.Abstract)

        ' Define a method that takes a ByRef argument of type Sample,
        ' a pointer to type Sample, and an array of Sample objects. The
        ' method returns a two-dimensional array of Sample objects.
        '
        ' To create this method, you need Type objects that represent the
        ' parameter types and the return type. Use the MakeByRefType, 
        ' MakePointerType, and MakeArrayType methods to create the Type
        ' objects.
        '
        Dim byRefMyType As Type = myType.MakeByRefType
        Dim pointerMyType As Type = myType.MakePointerType
        Dim arrayMyType As Type = myType.MakeArrayType
        Dim twoDimArrayMyType As Type = myType.MakeArrayType(2)

        ' Create the array of parameter types.
        Dim parameterTypes() As Type = _
            {byRefMyType, pointerMyType, arrayMyType}

        ' Define the abstract Test method. After you have compiled
        ' and run this code example code, you can use ildasm.exe 
        ' to open MakeXxxTypeExample.dll, examine the Sample type,
        ' and verify the parameter types and return type of the
        ' TestMethod method.
        '
        Dim myMethodBuilder As MethodBuilder = myType.DefineMethod( _
            "TestMethod", _
            MethodAttributes.Abstract Or MethodAttributes.Virtual _
                Or MethodAttributes.Public, _
            twoDimArrayMyType, _
            parameterTypes)

        ' Create the type and save the assembly. For a single-file 
        ' assembly, there is only one module to store the manifest 
        ' information in.
        '
        myType.CreateType()
        myAssembly.Save(myAsmName.Name & ".dll")

    End Sub
End Class

Commenti

Il MakeArrayType metodo consente di generare un tipo di matrice con qualsiasi tipo di elemento possibile, inclusi i tipi generici.

Vedi anche

Si applica a

Commenti e suggerimenti

Questa pagina è stata utile?