SqlBulkCopy.WriteToServer Methode

public:
 void WriteToServer(System::Data::DataTable ^ table, System::Data::DataRowState rowState);

public void WriteToServer(System.Data.DataTable table, System.Data.DataRowState rowState);

member this.WriteToServer : System.Data.DataTable * System.Data.DataRowState -> unit

Public Sub WriteToServer (table As DataTable, rowState As DataRowState)

Parameters

Voorbeelden

In de volgende consoletoepassing ziet u hoe u alleen de rijen bulksgewijs laadt in een DataTable rij die overeenkomt met een opgegeven status. In dit geval worden alleen ongewijzigde rijen toegevoegd. De doeltabel is een tabel in de AdventureWorks-database .

In dit voorbeeld wordt er een DataTable gemaakt tijdens runtime en worden er drie rijen aan toegevoegd. Voordat de WriteToServer methode wordt uitgevoerd, wordt een van de rijen bewerkt. De WriteToServer methode wordt aangeroepen met een DataRowState.UnchangedrowState argument, zodat alleen de twee ongewijzigde rijen bulksgewijs naar het doel worden gekopieerd.

using System.Data.SqlClient;

class Program
{
    static void Main()
    {
        string connectionString = GetConnectionString();
        // Open a connection to the AdventureWorks database.
        using (SqlConnection connection =
                   new SqlConnection(connectionString))
        {
            connection.Open();

            // Perform an initial count on the destination table.
            SqlCommand commandRowCount = new SqlCommand(
                "SELECT COUNT(*) FROM " +
                "dbo.BulkCopyDemoMatchingColumns;",
                connection);
            long countStart = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Starting row count = {0}", countStart);

            // Create a table with some rows.
            DataTable newProducts = MakeTable();

            // Make a change to one of the rows in the DataTable.
            DataRow row = newProducts.Rows[0];
            row.BeginEdit();
            row["Name"] = "AAA";
            row.EndEdit();

            // Create the SqlBulkCopy object.
            // Note that the column positions in the source DataTable
            // match the column positions in the destination table so
            // there is no need to map columns.
            using (SqlBulkCopy bulkCopy = new SqlBulkCopy(connection))
            {
                bulkCopy.DestinationTableName =
                    "dbo.BulkCopyDemoMatchingColumns";

                try
                {
                    // Write unchanged rows from the source to the destination.
                    bulkCopy.WriteToServer(newProducts, DataRowState.Unchanged);
                }
                catch (Exception ex)
                {
                    Console.WriteLine(ex.Message);
                }
            }

            // Perform a final count on the destination
            // table to see how many rows were added.
            long countEnd = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Ending row count = {0}", countEnd);
            Console.WriteLine("{0} rows were added.", countEnd - countStart);
            Console.WriteLine("Press Enter to finish.");
            Console.ReadLine();
        }
    }

    private static DataTable MakeTable()
        // Create a new DataTable named NewProducts.
    {
        DataTable newProducts = new DataTable("NewProducts");

        // Add three column objects to the table.
        DataColumn productID = new DataColumn();
        productID.DataType = System.Type.GetType("System.Int32");
        productID.ColumnName = "ProductID";
        productID.AutoIncrement = true;
        newProducts.Columns.Add(productID);

        DataColumn productName = new DataColumn();
        productName.DataType = System.Type.GetType("System.String");
        productName.ColumnName = "Name";
        newProducts.Columns.Add(productName);

        DataColumn productNumber = new DataColumn();
        productNumber.DataType = System.Type.GetType("System.String");
        productNumber.ColumnName = "ProductNumber";
        newProducts.Columns.Add(productNumber);

        // Create an array for DataColumn objects.
        DataColumn[] keys = new DataColumn[1];
        keys[0] = productID;
        newProducts.PrimaryKey = keys;

        // Add some new rows to the collection.
        DataRow row = newProducts.NewRow();
        row["Name"] = "CC-101-WH";
        row["ProductNumber"] = "Cyclocomputer - White";

        newProducts.Rows.Add(row);
        row = newProducts.NewRow();
        row["Name"] = "CC-101-BK";
        row["ProductNumber"] = "Cyclocomputer - Black";

        newProducts.Rows.Add(row);
        row = newProducts.NewRow();
        row["Name"] = "CC-101-ST";
        row["ProductNumber"] = "Cyclocomputer - Stainless";
        newProducts.Rows.Add(row);
        newProducts.AcceptChanges();

        // Return the new DataTable.
        return newProducts;
    }
    private static string GetConnectionString()
        // To avoid storing the connection string in your code,
        // you can retrieve it from a configuration file.
    {
        return "Data Source=(local); " +
            " Integrated Security=true;" +
            "Initial Catalog=AdventureWorks;";
    }
}

Imports System.Data.SqlClient

Module Module1
    Sub Main()
        Dim connectionString As String = GetConnectionString()

        ' Open a connection to the AdventureWorks database.
        Using connection As SqlConnection = _
           New SqlConnection(connectionString)
            connection.Open()

            ' Perform an initial count on the destination table.
            Dim commandRowCount As New SqlCommand( _
            "SELECT COUNT(*) FROM dbo.BulkCopyDemoMatchingColumns;", _
                connection)
            Dim countStart As Long = _
               System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Starting row count = {0}", countStart)

            ' Create a table with some rows.
            Dim newProducts As DataTable = MakeTable()

            ' Make a change to one of the rows in the DataTable.
            Dim row As DataRow = newProducts.Rows(0)
            row.BeginEdit()
            row("Name") = "AAA"
            row.EndEdit()

            ' Set up the bulk copy object. 
            ' Note that the column positions in the source DataTable 
            ' match the column positions in the destination table, 
            ' so there is no need to map columns.
            Using bulkCopy As SqlBulkCopy = _
              New SqlBulkCopy(connection)
                bulkCopy.DestinationTableName = "dbo.BulkCopyDemoMatchingColumns"

                Try
                    ' Write unchanged rows from the source to the destination.
                    bulkCopy.WriteToServer(newProducts, DataRowState.Unchanged)

                Catch ex As Exception
                    Console.WriteLine(ex.Message)
                End Try
            End Using

            ' Perform a final count on the destination table
            ' to see how many rows were added.
            Dim countEnd As Long = _
                System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Ending row count = {0}", countEnd)
            Console.WriteLine("{0} rows were added.", countEnd - countStart)

            Console.WriteLine("Press Enter to finish.")
            Console.ReadLine()
        End Using
    End Sub

    Private Function MakeTable() As DataTable
        ' Create a new DataTable named NewProducts.
        Dim newProducts As DataTable = _
         New DataTable("NewProducts")

        ' Add three column objects to the table.
        Dim productID As DataColumn = New DataColumn()
        productID.DataType = System.Type.GetType("System.Int32")
        productID.ColumnName = "ProductID"
        productID.AutoIncrement = True
        newProducts.Columns.Add(productID)

        Dim productName As DataColumn = New DataColumn()
        productName.DataType = System.Type.GetType("System.String")
        productName.ColumnName = "Name"
        newProducts.Columns.Add(productName)

        Dim productNumber As DataColumn = New DataColumn()
        productNumber.DataType = System.Type.GetType("System.String")
        productNumber.ColumnName = "ProductNumber"
        newProducts.Columns.Add(productNumber)

        ' Create an array for DataColumn objects.
        Dim keys(0) As DataColumn
        keys(0) = productID
        newProducts.PrimaryKey = keys

        ' Add some new rows to the collection.
        Dim row As DataRow
        row = newProducts.NewRow()
        row("Name") = "CC-101-WH"
        row("ProductNumber") = "Cyclocomputer - White"
        newProducts.Rows.Add(row)

        row = newProducts.NewRow()
        row("Name") = "CC-101-BK"
        row("ProductNumber") = "Cyclocomputer - Black"
        newProducts.Rows.Add(row)

        row = newProducts.NewRow()
        row("Name") = "CC-101-ST"
        row("ProductNumber") = "Cyclocomputer - Stainless"
        newProducts.Rows.Add(row)
        newProducts.AcceptChanges()

        ' Return the new DataTable.
        Return newProducts
    End Function

    Private Function GetConnectionString() As String
        ' To avoid storing the connection string in your code, 
        ' you can retrieve it from a configuration file. 
        Return "Data Source=(local);" & _
            "Integrated Security=true;" & _
            "Initial Catalog=AdventureWorks;"
    End Function
End Module

Opmerkingen

Alleen rijen in de DataTable statussen die in het rowState argument zijn aangegeven en die niet zijn verwijderd, worden gekopieerd naar de doeltabel.

Terwijl de bulksgewijs kopiëren wordt uitgevoerd, is de gekoppelde bestemming SqlConnection bezet en kunnen er geen andere bewerkingen worden uitgevoerd op de verbinding.

De ColumnMappings verzameling wordt toegewezen van de DataTable kolommen aan de doeldatabasetabel.

Zie ook

• DataRowState
• Bewerkingen voor bulksgewijs kopiëren in SQL Server
• overzicht van ADO.NET

public:
 void WriteToServer(System::Data::IDataReader ^ reader);

public void WriteToServer(System.Data.IDataReader reader);

member this.WriteToServer : System.Data.IDataReader -> unit

Public Sub WriteToServer (reader As IDataReader)

Parameters

Voorbeelden

De volgende consoletoepassing laat zien hoe u gegevens bulksgewijs laadt vanuit een SqlDataReader. De doeltabel is een tabel in de AdventureWorks-database .

using System.Data.SqlClient;

class Program
{
    static void Main()
    {
        string connectionString = GetConnectionString();
        // Open a sourceConnection to the AdventureWorks database.
        using (SqlConnection sourceConnection =
                   new SqlConnection(connectionString))
        {
            sourceConnection.Open();

            // Perform an initial count on the destination table.
            SqlCommand commandRowCount = new SqlCommand(
                "SELECT COUNT(*) FROM " +
                "dbo.BulkCopyDemoMatchingColumns;",
                sourceConnection);
            long countStart = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Starting row count = {0}", countStart);

            // Get data from the source table as a SqlDataReader.
            SqlCommand commandSourceData = new SqlCommand(
                "SELECT ProductID, Name, " +
                "ProductNumber " +
                "FROM Production.Product;", sourceConnection);
            SqlDataReader reader =
                commandSourceData.ExecuteReader();

            // Set up the bulk copy object using a connection string.
            // In the real world you would not use SqlBulkCopy to move
            // data from one table to the other in the same database.
            using (SqlBulkCopy bulkCopy =
                       new SqlBulkCopy(connectionString))
            {
                bulkCopy.DestinationTableName =
                    "dbo.BulkCopyDemoMatchingColumns";

                try
                {
                    // Write from the source to the destination.
                    bulkCopy.WriteToServer(reader);
                }
                catch (Exception ex)
                {
                    Console.WriteLine(ex.Message);
                }
                finally
                {
                    // Close the SqlDataReader. The SqlBulkCopy
                    // object is automatically closed at the end
                    // of the using block.
                    reader.Close();
                }
            }

            // Perform a final count on the destination
            // table to see how many rows were added.
            long countEnd = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Ending row count = {0}", countEnd);
            Console.WriteLine("{0} rows were added.", countEnd - countStart);
            Console.WriteLine("Press Enter to finish.");
            Console.ReadLine();
        }
    }

    private static string GetConnectionString()
        // To avoid storing the sourceConnection string in your code,
        // you can retrieve it from a configuration file.
    {
        return "Data Source=(local); " +
            " Integrated Security=true;" +
            "Initial Catalog=AdventureWorks;";
    }
}

Imports System.Data.SqlClient

Module Module1
    Sub Main()
        Dim connectionString As String = GetConnectionString()

        ' Open a connection to the AdventureWorks database.
        Using sourceConnection As SqlConnection = _
           New SqlConnection(connectionString)
            sourceConnection.Open()

            ' Perform an initial count on the destination table.
            Dim commandRowCount As New SqlCommand( _
            "SELECT COUNT(*) FROM dbo.BulkCopyDemoMatchingColumns;", _
                sourceConnection)
            Dim countStart As Long = _
               System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Starting row count = {0}", countStart)

            ' Get data from the source table as a SqlDataReader.
            Dim commandSourceData As SqlCommand = New SqlCommand( _
               "SELECT ProductID, Name, ProductNumber " & _
               "FROM Production.Product;", sourceConnection)
            Dim reader As SqlDataReader = commandSourceData.ExecuteReader

            ' Set up the bulk copy object using a connection string. 
            ' In the real world you would not use SqlBulkCopy to move
            ' data from one table to the other in the same database.
            Using bulkCopy As SqlBulkCopy = New SqlBulkCopy(connectionString)
                bulkCopy.DestinationTableName = _
                "dbo.BulkCopyDemoMatchingColumns"

                Try
                    ' Write from the source to the destination.
                    bulkCopy.WriteToServer(reader)

                Catch ex As Exception
                    Console.WriteLine(ex.Message)

                Finally
                    ' Close the SqlDataReader. The SqlBulkCopy
                    ' object is automatically closed at the end
                    ' of the Using block.
                    reader.Close()
                End Try
            End Using

            ' Perform a final count on the destination table
            ' to see how many rows were added.
            Dim countEnd As Long = _
                System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Ending row count = {0}", countEnd)
            Console.WriteLine("{0} rows were added.", countEnd - countStart)

            Console.WriteLine("Press Enter to finish.")
            Console.ReadLine()
        End Using
    End Sub

    Private Function GetConnectionString() As String
        ' To avoid storing the sourceConnection string in your code, 
        ' you can retrieve it from a configuration file. 
        Return "Data Source=(local);" & _
            "Integrated Security=true;" & _
            "Initial Catalog=AdventureWorks;"
    End Function
End Module

Opmerkingen

De kopieerbewerking begint bij de volgende beschikbare rij in de lezer. Meestal is de lezer net geretourneerd door ExecuteReader of een vergelijkbare aanroep, dus de volgende beschikbare rij is de eerste rij. Als u meerdere resultaten wilt verwerken, roept NextResult u de gegevenslezer aan en roept u deze opnieuw aan WriteToServer .

Houd er rekening mee dat het gebruik WriteToServer van de status van de lezer wordt gewijzigd. De methode wordt aangeroepen Read totdat deze onwaar retourneert, de bewerking wordt afgebroken of er treedt een fout op. Dit betekent dat de gegevenslezer een andere status heeft, waarschijnlijk aan het einde van de resultatenset, wanneer de WriteToServer bewerking is voltooid.

Terwijl de bulksgewijs kopiëren wordt uitgevoerd, is de gekoppelde bestemming SqlConnection bezet en kunnen er geen andere bewerkingen worden uitgevoerd op de verbinding.

De ColumnMappings verzameling wordt toegewezen van de kolommen van de gegevenslezer aan de doeldatabasetabel.

Zie ook

• Bewerkingen voor bulksgewijs kopiëren in SQL Server
• overzicht van ADO.NET

public:
 void WriteToServer(System::Data::DataTable ^ table);

public void WriteToServer(System.Data.DataTable table);

member this.WriteToServer : System.Data.DataTable -> unit

Public Sub WriteToServer (table As DataTable)

Parameters

Voorbeelden

In de volgende consoletoepassing ziet u hoe u gegevens bulksgewijs laadt vanuit een DataTable. De doeltabel is een tabel in de AdventureWorks-database .

In dit voorbeeld wordt er een DataTable gemaakt tijdens runtime en is dit de bron van de SqlBulkCopy bewerking.

using System.Data.SqlClient;

class Program
{
    static void Main()
    {
        string connectionString = GetConnectionString();
        // Open a connection to the AdventureWorks database.
        using (SqlConnection connection =
                   new SqlConnection(connectionString))
        {
            connection.Open();

            // Perform an initial count on the destination table.
            SqlCommand commandRowCount = new SqlCommand(
                "SELECT COUNT(*) FROM " +
                "dbo.BulkCopyDemoMatchingColumns;",
                connection);
            long countStart = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Starting row count = {0}", countStart);

            // Create a table with some rows.
            DataTable newProducts = MakeTable();

            // Create the SqlBulkCopy object.
            // Note that the column positions in the source DataTable
            // match the column positions in the destination table so
            // there is no need to map columns.
            using (SqlBulkCopy bulkCopy = new SqlBulkCopy(connection))
            {
                bulkCopy.DestinationTableName =
                    "dbo.BulkCopyDemoMatchingColumns";

                try
                {
                    // Write from the source to the destination.
                    bulkCopy.WriteToServer(newProducts);
                }
                catch (Exception ex)
                {
                    Console.WriteLine(ex.Message);
                }
            }

            // Perform a final count on the destination
            // table to see how many rows were added.
            long countEnd = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Ending row count = {0}", countEnd);
            Console.WriteLine("{0} rows were added.", countEnd - countStart);
            Console.WriteLine("Press Enter to finish.");
            Console.ReadLine();
        }
    }

    private static DataTable MakeTable()
        // Create a new DataTable named NewProducts.
    {
        DataTable newProducts = new DataTable("NewProducts");

        // Add three column objects to the table.
        DataColumn productID = new DataColumn();
        productID.DataType = System.Type.GetType("System.Int32");
        productID.ColumnName = "ProductID";
        productID.AutoIncrement = true;
        newProducts.Columns.Add(productID);

        DataColumn productName = new DataColumn();
        productName.DataType = System.Type.GetType("System.String");
        productName.ColumnName = "Name";
        newProducts.Columns.Add(productName);

        DataColumn productNumber = new DataColumn();
        productNumber.DataType = System.Type.GetType("System.String");
        productNumber.ColumnName = "ProductNumber";
        newProducts.Columns.Add(productNumber);

        // Create an array for DataColumn objects.
        DataColumn[] keys = new DataColumn[1];
        keys[0] = productID;
        newProducts.PrimaryKey = keys;

        // Add some new rows to the collection.
        DataRow row = newProducts.NewRow();
        row["Name"] = "CC-101-WH";
        row["ProductNumber"] = "Cyclocomputer - White";

        newProducts.Rows.Add(row);
        row = newProducts.NewRow();
        row["Name"] = "CC-101-BK";
        row["ProductNumber"] = "Cyclocomputer - Black";

        newProducts.Rows.Add(row);
        row = newProducts.NewRow();
        row["Name"] = "CC-101-ST";
        row["ProductNumber"] = "Cyclocomputer - Stainless";
        newProducts.Rows.Add(row);
        newProducts.AcceptChanges();

        // Return the new DataTable.
        return newProducts;
    }
    private static string GetConnectionString()
        // To avoid storing the connection string in your code,
        // you can retrieve it from a configuration file.
    {
        return "Data Source=(local); " +
            " Integrated Security=true;" +
            "Initial Catalog=AdventureWorks;";
    }
}

Imports System.Data.SqlClient

Module Module1
    Sub Main()
        Dim connectionString As String = GetConnectionString()

        ' Open a connection to the AdventureWorks database.
        Using connection As SqlConnection = _
           New SqlConnection(connectionString)
            connection.Open()

            ' Perform an initial count on the destination table.
            Dim commandRowCount As New SqlCommand( _
            "SELECT COUNT(*) FROM dbo.BulkCopyDemoMatchingColumns;", _
                connection)
            Dim countStart As Long = _
               System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Starting row count = {0}", countStart)

            ' Create a table with some rows.
            Dim newProducts As DataTable = MakeTable()

            ' Note that the column positions in the source DataTable 
            ' match the column positions in the destination table, 
            ' so there is no need to map columns.
            Using bulkCopy As SqlBulkCopy = _
              New SqlBulkCopy(connection)
                bulkCopy.DestinationTableName = "dbo.BulkCopyDemoMatchingColumns"

                Try
                    ' Write from the source to the destination.
                    bulkCopy.WriteToServer(newProducts)

                Catch ex As Exception
                    Console.WriteLine(ex.Message)
                End Try
            End Using

            ' Perform a final count on the destination table
            ' to see how many rows were added.
            Dim countEnd As Long = _
                System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Ending row count = {0}", countEnd)
            Console.WriteLine("{0} rows were added.", countEnd - countStart)

            Console.WriteLine("Press Enter to finish.")
            Console.ReadLine()
        End Using
    End Sub

    Private Function MakeTable() As DataTable
        ' Create a new DataTable named NewProducts.
        Dim newProducts As DataTable = _
         New DataTable("NewProducts")

        ' Add three column objects to the table.
        Dim productID As DataColumn = New DataColumn()
        productID.DataType = System.Type.GetType("System.Int32")
        productID.ColumnName = "ProductID"
        productID.AutoIncrement = True
        newProducts.Columns.Add(productID)

        Dim productName As DataColumn = New DataColumn()
        productName.DataType = System.Type.GetType("System.String")
        productName.ColumnName = "Name"
        newProducts.Columns.Add(productName)

        Dim productNumber As DataColumn = New DataColumn()
        productNumber.DataType = System.Type.GetType("System.String")
        productNumber.ColumnName = "ProductNumber"
        newProducts.Columns.Add(productNumber)

        ' Create an array for DataColumn objects.
        Dim keys(0) As DataColumn
        keys(0) = productID
        newProducts.PrimaryKey = keys

        ' Add some new rows to the collection.
        Dim row As DataRow
        row = newProducts.NewRow()
        row("Name") = "CC-101-WH"
        row("ProductNumber") = "Cyclocomputer - White"
        newProducts.Rows.Add(row)

        row = newProducts.NewRow()
        row("Name") = "CC-101-BK"
        row("ProductNumber") = "Cyclocomputer - Black"
        newProducts.Rows.Add(row)

        row = newProducts.NewRow()
        row("Name") = "CC-101-ST"
        row("ProductNumber") = "Cyclocomputer - Stainless"
        newProducts.Rows.Add(row)
        newProducts.AcceptChanges()

        ' Return the new DataTable.
        Return newProducts
    End Function

    Private Function GetConnectionString() As String
        ' To avoid storing the connection string in your code, 
        ' you can retrieve it from a configuration file. 
        Return "Data Source=(local);" & _
            "Integrated Security=true;" & _
            "Initial Catalog=AdventureWorks;"
    End Function
End Module

Opmerkingen

Alle rijen in de tabel DataTable worden gekopieerd naar de doeltabel, behalve de rijen die zijn verwijderd.

Terwijl de bulksgewijs kopiëren wordt uitgevoerd, is de gekoppelde bestemming SqlConnection bezet en kunnen er geen andere bewerkingen worden uitgevoerd op de verbinding.

De ColumnMappings verzameling wordt toegewezen van de DataTable kolommen aan de doeldatabasetabel.

Zie ook

• Bewerkingen voor bulksgewijs kopiëren in SQL Server
• overzicht van ADO.NET

public:
 void WriteToServer(System::Data::Common::DbDataReader ^ reader);

public void WriteToServer(System.Data.Common.DbDataReader reader);

member this.WriteToServer : System.Data.Common.DbDataReader -> unit

Public Sub WriteToServer (reader As DbDataReader)

Parameters

public:
 void WriteToServer(cli::array <System::Data::DataRow ^> ^ rows);

public void WriteToServer(System.Data.DataRow[] rows);

member this.WriteToServer : System.Data.DataRow[] -> unit

Public Sub WriteToServer (rows As DataRow())

Parameters

Voorbeelden

In de volgende consoletoepassing ziet u hoe u gegevens bulksgewijs laadt vanuit een DataRow matrix. De doeltabel is een tabel in de AdventureWorks-database .

In dit voorbeeld wordt er een DataTable gemaakt tijdens runtime. Er wordt één rij geselecteerd uit de DataTable rij die u naar de doeltabel wilt kopiëren.

using System.Data.SqlClient;

class Program
{
    static void Main()
    {
        string connectionString = GetConnectionString();
        // Open a connection to the AdventureWorks database.
        using (SqlConnection connection =
                   new SqlConnection(connectionString))
        {
            connection.Open();

            // Perform an initial count on the destination table.
            SqlCommand commandRowCount = new SqlCommand(
                "SELECT COUNT(*) FROM " +
                "dbo.BulkCopyDemoMatchingColumns;",
                connection);
            long countStart = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Starting row count = {0}", countStart);

            // Create a table with some rows.
            DataTable newProducts = MakeTable();

            // Get a reference to a single row in the table.
            DataRow[] rowArray = newProducts.Select(
                "Name='CC-101-BK'");

            // Create the SqlBulkCopy object.
            // Note that the column positions in the source DataTable
            // match the column positions in the destination table so
            // there is no need to map columns.
            using (SqlBulkCopy bulkCopy = new SqlBulkCopy(connection))
            {
                bulkCopy.DestinationTableName =
                    "dbo.BulkCopyDemoMatchingColumns";

                try
                {
                    // Write the array of rows to the destination.
                    bulkCopy.WriteToServer(rowArray);
                }
                catch (Exception ex)
                {
                    Console.WriteLine(ex.Message);
                }
            }

            // Perform a final count on the destination
            // table to see how many rows were added.
            long countEnd = System.Convert.ToInt32(
                commandRowCount.ExecuteScalar());
            Console.WriteLine("Ending row count = {0}", countEnd);
            Console.WriteLine("{0} rows were added.", countEnd - countStart);
            Console.WriteLine("Press Enter to finish.");
            Console.ReadLine();
        }
    }

    private static DataTable MakeTable()
        // Create a new DataTable named NewProducts.
    {
        DataTable newProducts = new DataTable("NewProducts");

        // Add three column objects to the table.
        DataColumn productID = new DataColumn();
        productID.DataType = System.Type.GetType("System.Int32");
        productID.ColumnName = "ProductID";
        productID.AutoIncrement = true;
        newProducts.Columns.Add(productID);

        DataColumn productName = new DataColumn();
        productName.DataType = System.Type.GetType("System.String");
        productName.ColumnName = "Name";
        newProducts.Columns.Add(productName);

        DataColumn productNumber = new DataColumn();
        productNumber.DataType = System.Type.GetType("System.String");
        productNumber.ColumnName = "ProductNumber";
        newProducts.Columns.Add(productNumber);

        // Create an array for DataColumn objects.
        DataColumn[] keys = new DataColumn[1];
        keys[0] = productID;
        newProducts.PrimaryKey = keys;

        // Add some new rows to the collection.
        DataRow row = newProducts.NewRow();
        row["Name"] = "CC-101-WH";
        row["ProductNumber"] = "Cyclocomputer - White";

        newProducts.Rows.Add(row);
        row = newProducts.NewRow();
        row["Name"] = "CC-101-BK";
        row["ProductNumber"] = "Cyclocomputer - Black";

        newProducts.Rows.Add(row);
        row = newProducts.NewRow();
        row["Name"] = "CC-101-ST";
        row["ProductNumber"] = "Cyclocomputer - Stainless";
        newProducts.Rows.Add(row);
        newProducts.AcceptChanges();

        // Return the new DataTable.
        return newProducts;
    }
    private static string GetConnectionString()
        // To avoid storing the connection string in your code,
        // you can retrieve it from a configuration file.
    {
        return "Data Source=(local); " +
            " Integrated Security=true;" +
            "Initial Catalog=AdventureWorks;";
    }
}

Imports System.Data.SqlClient

Module Module1
    Sub Main()
        Dim connectionString As String = GetConnectionString()

        ' Open a connection to the AdventureWorks database.
        Using connection As SqlConnection = _
           New SqlConnection(connectionString)
            connection.Open()

            ' Perform an initial count on the destination table.
            Dim commandRowCount As New SqlCommand( _
            "SELECT COUNT(*) FROM dbo.BulkCopyDemoMatchingColumns;", _
                connection)
            Dim countStart As Long = _
               System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Starting row count = {0}", countStart)

            ' Create a table with some rows.
            Dim newProducts As DataTable = MakeTable()

            ' Get a reference to a single row in the table.
            Dim rowArray() As DataRow = newProducts.Select( _
             "Name='CC-101-BK'")

            ' Note that the column positions in the source DataTable 
            ' match the column positions in the destination table, 
            ' so there is no need to map columns.
            Using bulkCopy As SqlBulkCopy = _
              New SqlBulkCopy(connection)
                bulkCopy.DestinationTableName = "dbo.BulkCopyDemoMatchingColumns"

                Try
                    ' Write the array of rows to the destination.
                    bulkCopy.WriteToServer(rowArray)

                Catch ex As Exception
                    Console.WriteLine(ex.Message)
                End Try
            End Using

            ' Perform a final count on the destination table
            ' to see how many rows were added.
            Dim countEnd As Long = _
                System.Convert.ToInt32(commandRowCount.ExecuteScalar())
            Console.WriteLine("Ending row count = {0}", countEnd)
            Console.WriteLine("{0} rows were added.", countEnd - countStart)

            Console.WriteLine("Press Enter to finish.")
            Console.ReadLine()
        End Using
    End Sub

    Private Function MakeTable() As DataTable
        ' Create a new DataTable named NewProducts.
        Dim newProducts As DataTable = _
         New DataTable("NewProducts")

        ' Add three column objects to the table.
        Dim productID As DataColumn = New DataColumn()
        productID.DataType = System.Type.GetType("System.Int32")
        productID.ColumnName = "ProductID"
        productID.AutoIncrement = True
        newProducts.Columns.Add(productID)

        Dim productName As DataColumn = New DataColumn()
        productName.DataType = System.Type.GetType("System.String")
        productName.ColumnName = "Name"
        newProducts.Columns.Add(productName)

        Dim productNumber As DataColumn = New DataColumn()
        productNumber.DataType = System.Type.GetType("System.String")
        productNumber.ColumnName = "ProductNumber"
        newProducts.Columns.Add(productNumber)

        ' Create an array for DataColumn objects.
        Dim keys(0) As DataColumn
        keys(0) = productID
        newProducts.PrimaryKey = keys

        ' Add some new rows to the collection.
        Dim row As DataRow
        row = newProducts.NewRow()
        row("Name") = "CC-101-WH"
        row("ProductNumber") = "Cyclocomputer - White"
        newProducts.Rows.Add(row)

        row = newProducts.NewRow()
        row("Name") = "CC-101-BK"
        row("ProductNumber") = "Cyclocomputer - Black"
        newProducts.Rows.Add(row)

        row = newProducts.NewRow()
        row("Name") = "CC-101-ST"
        row("ProductNumber") = "Cyclocomputer - Stainless"
        newProducts.Rows.Add(row)
        newProducts.AcceptChanges()

        ' Return the new DataTable.
        Return newProducts
    End Function

    Private Function GetConnectionString() As String
        ' To avoid storing the connection string in your code, 
        ' you can retrieve it from a configuration file. 
        Return "Data Source=(local);" & _
            "Integrated Security=true;" & _
            "Initial Catalog=AdventureWorks;"
    End Function
End Module

Opmerkingen

Terwijl de bulksgewijs kopiëren wordt uitgevoerd, is de gekoppelde bestemming SqlConnection bezet en kunnen er geen andere bewerkingen worden uitgevoerd op de verbinding.

De ColumnMappings verzameling wordt toegewezen van de DataRow kolommen aan de doeldatabasetabel.

Zie ook

• Bewerkingen voor bulksgewijs kopiëren in SQL Server
• overzicht van ADO.NET