CustomAttributeData.GetCustomAttributes Methode
Definitie
Belangrijk
Bepaalde informatie heeft betrekking op een voorlopige productversie die aanzienlijk kan worden gewijzigd voordat deze wordt uitgebracht. Microsoft biedt geen enkele expliciete of impliciete garanties met betrekking tot de informatie die hier wordt verstrekt.
Retourneert een lijst CustomAttributeData met objecten die gegevens vertegenwoordigen over de kenmerken die zijn toegepast op het doel.
Overloads
| Name | Description |
|---|---|
| GetCustomAttributes(Assembly) |
Retourneert een lijst CustomAttributeData met objecten die gegevens vertegenwoordigen over de kenmerken die zijn toegepast op de doelassembly. |
| GetCustomAttributes(MemberInfo) |
Retourneert een lijst CustomAttributeData met objecten die gegevens vertegenwoordigen over de kenmerken die zijn toegepast op het doellid. |
| GetCustomAttributes(Module) |
Retourneert een lijst CustomAttributeData met objecten die gegevens vertegenwoordigen over de kenmerken die zijn toegepast op de doelmodule. |
| GetCustomAttributes(ParameterInfo) |
Retourneert een lijst CustomAttributeData met objecten die gegevens vertegenwoordigen over de kenmerken die zijn toegepast op de doelparameter. |
GetCustomAttributes(Assembly)
Retourneert een lijst CustomAttributeData met objecten die gegevens vertegenwoordigen over de kenmerken die zijn toegepast op de doelassembly.
public:
static System::Collections::Generic::IList<System::Reflection::CustomAttributeData ^> ^ GetCustomAttributes(System::Reflection::Assembly ^ target);public static System.Collections.Generic.IList<System.Reflection.CustomAttributeData> GetCustomAttributes(System.Reflection.Assembly target);static member GetCustomAttributes : System.Reflection.Assembly -> System.Collections.Generic.IList<System.Reflection.CustomAttributeData>Public Shared Function GetCustomAttributes (target As Assembly) As IList(Of CustomAttributeData)Parameters
- target
- Assembly
De assembly waarvan de aangepaste kenmerkgegevens moeten worden opgehaald.
Retouren
Een lijst met objecten die gegevens vertegenwoordigen over de kenmerken die zijn toegepast op de doelassembly.
Uitzonderingen
target is null.
Voorbeelden
In het volgende voorbeeld wordt een aangepast kenmerk gedefinieerd met vier constructors en vier eigenschappen. Twee van de eigenschappen zijn alleen-lezen en worden ingesteld met behulp van de positionele parameters van de constructors. De andere twee eigenschappen zijn lezen/schrijven en kunnen alleen worden ingesteld met benoemde argumenten. Een positionele eigenschap is een matrix met tekenreeksen en één benoemde eigenschap is een matrix met gehele getallen.
Het kenmerk wordt toegepast op de assembly, op een type dat in de assembly is gedeclareerd, op een methode van het type en op een parameter van de methode. Voor deze gevallen worden verschillende constructors gebruikt. Wanneer de assembly wordt uitgevoerd, wordt de assembly geladen in de context alleen reflectie en worden de aangepaste kenmerken weergegeven.
Het kenmerk dat wordt toegepast op het type demonstreert matrixeigenschappen, met zowel positionele als benoemde argumenten.
De GetCustomAttributes methode wordt gebruikt Main() om de aangepaste kenmerken op te halen die op de assembly worden toegepast. De retourwaarde van de methode wordt doorgegeven aan de ShowAttributeData methode.
using System;
using System.Reflection;
using System.Collections.Generic;
using System.Collections.ObjectModel;
// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind.ThirdKind, Note="This is a note on the assembly.")]
// An enumeration used by the ExampleAttribute class.
public enum ExampleKind
{
FirstKind,
SecondKind,
ThirdKind,
FourthKind
};
// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets.All)]
public class ExampleAttribute : Attribute
{
// Data for properties.
private ExampleKind kindValue;
private string noteValue;
private string[] arrayStrings;
private int[] arrayNumbers;
// Constructors. The parameterless constructor (.ctor) calls
// the constructor that specifies ExampleKind and an array of
// strings, and supplies the default values.
//
public ExampleAttribute(ExampleKind initKind, string[] initStrings)
{
kindValue = initKind;
arrayStrings = initStrings;
}
public ExampleAttribute(ExampleKind initKind) : this(initKind, null) {}
public ExampleAttribute() : this(ExampleKind.FirstKind, null) {}
// Properties. The Note and Numbers properties must be read/write, so they
// can be used as named parameters.
//
public ExampleKind Kind { get { return kindValue; }}
public string[] Strings { get { return arrayStrings; }}
public string Note
{
get { return noteValue; }
set { noteValue = value; }
}
public int[] Numbers
{
get { return arrayNumbers; }
set { arrayNumbers = value; }
}
}
// The example attribute is applied to the test class.
//
[Example(ExampleKind.SecondKind,
new string[] { "String array argument, line 1",
"String array argument, line 2",
"String array argument, line 3" },
Note="This is a note on the class.",
Numbers = new int[] { 53, 57, 59 })]
public class Test
{
// The example attribute is applied to a method, using the
// parameterless constructor and supplying a named argument.
// The attribute is also applied to the method parameter.
//
[Example(Note="This is a note on a method.")]
public void TestMethod([Example] object arg) { }
// Main() gets objects representing the assembly, the test
// type, the test method, and the method parameter. Custom
// attribute data is displayed for each of these.
//
public static void Main()
{
Assembly asm = Assembly.ReflectionOnlyLoad("Source");
Type t = asm.GetType("Test");
MethodInfo m = t.GetMethod("TestMethod");
ParameterInfo[] p = m.GetParameters();
Console.WriteLine("\r\nAttributes for assembly: '{0}'", asm);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm));
Console.WriteLine("\r\nAttributes for type: '{0}'", t);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(t));
Console.WriteLine("\r\nAttributes for member: '{0}'", m);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(m));
Console.WriteLine("\r\nAttributes for parameter: '{0}'", p);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(p[0]));
}
private static void ShowAttributeData(
IList<CustomAttributeData> attributes)
{
foreach( CustomAttributeData cad in attributes )
{
Console.WriteLine(" {0}", cad);
Console.WriteLine(" Constructor: '{0}'", cad.Constructor);
Console.WriteLine(" Constructor arguments:");
foreach( CustomAttributeTypedArgument cata
in cad.ConstructorArguments )
{
ShowValueOrArray(cata);
}
Console.WriteLine(" Named arguments:");
foreach( CustomAttributeNamedArgument cana
in cad.NamedArguments )
{
Console.WriteLine(" MemberInfo: '{0}'",
cana.MemberInfo);
ShowValueOrArray(cana.TypedValue);
}
}
}
private static void ShowValueOrArray(CustomAttributeTypedArgument cata)
{
if (cata.Value.GetType() == typeof(ReadOnlyCollection<CustomAttributeTypedArgument>))
{
Console.WriteLine(" Array of '{0}':", cata.ArgumentType);
foreach (CustomAttributeTypedArgument cataElement in
(ReadOnlyCollection<CustomAttributeTypedArgument>) cata.Value)
{
Console.WriteLine(" Type: '{0}' Value: '{1}'",
cataElement.ArgumentType, cataElement.Value);
}
}
else
{
Console.WriteLine(" Type: '{0}' Value: '{1}'",
cata.ArgumentType, cata.Value);
}
}
}
/* This code example produces output similar to the following:
Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
[System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
Constructor: 'Void .ctor(Int32)'
Constructor arguments:
Type: 'System.Int32' Value: '8'
Named arguments:
[System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'Boolean WrapNonExceptionThrows'
Type: 'System.Boolean' Value: 'True'
[ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
Constructor: 'Void .ctor(ExampleKind)'
Constructor arguments:
Type: 'ExampleKind' Value: '2'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the assembly.'
Attributes for type: 'Test'
[ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
Constructor: 'Void .ctor(ExampleKind, System.String[])'
Constructor arguments:
Type: 'ExampleKind' Value: '1'
Array of 'System.String[]':
Type: 'System.String' Value: 'String array argument, line 1'
Type: 'System.String' Value: 'String array argument, line 2'
Type: 'System.String' Value: 'String array argument, line 3'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the class.'
MemberInfo: 'Int32[] Numbers'
Array of 'System.Int32[]':
Type: 'System.Int32' Value: '53'
Type: 'System.Int32' Value: '57'
Type: 'System.Int32' Value: '59'
Attributes for member: 'Void TestMethod(System.Object)'
[ExampleAttribute(Note = "This is a note on a method.")]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on a method.'
Attributes for parameter: 'System.Object arg'
[ExampleAttribute()]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
*/
Imports System.Reflection
Imports System.Collections.Generic
Imports System.Collections.ObjectModel
' The example attribute is applied to the assembly.
<Assembly:Example(ExampleKind.ThirdKind, Note:="This is a note on the assembly.")>
' An enumeration used by the ExampleAttribute class.
Public Enum ExampleKind
FirstKind
SecondKind
ThirdKind
FourthKind
End Enum
' An example attribute. The attribute can be applied to all
' targets, from assemblies to parameters.
'
<AttributeUsage(AttributeTargets.All)> _
Public Class ExampleAttribute
Inherits Attribute
' Data for properties.
Private kindValue As ExampleKind
Private noteValue As String
Private arrayStrings() As String
Private arrayNumbers() As Integer
' Constructors. The parameterless constructor (.ctor) calls
' the constructor that specifies ExampleKind and an array of
' strings, and supplies the default values.
'
Public Sub New(ByVal initKind As ExampleKind, ByVal initStrings() As String)
kindValue = initKind
arrayStrings = initStrings
End Sub
Public Sub New(ByVal initKind As ExampleKind)
Me.New(initKind, Nothing)
End Sub
Public Sub New()
Me.New(ExampleKind.FirstKind, Nothing)
End Sub
' Properties. The Note and Numbers properties must be read/write, so they
' can be used as named parameters.
'
Public ReadOnly Property Kind As ExampleKind
Get
Return kindValue
End Get
End Property
Public ReadOnly Property Strings As String()
Get
Return arrayStrings
End Get
End Property
Public Property Note As String
Get
Return noteValue
End Get
Set
noteValue = value
End Set
End Property
Public Property Numbers As Integer()
Get
Return arrayNumbers
End Get
Set
arrayNumbers = value
End Set
End Property
End Class
' The example attribute is applied to the test class.
'
<Example(ExampleKind.SecondKind, _
New String() { "String array argument, line 1", _
"String array argument, line 2", _
"String array argument, line 3" }, _
Note := "This is a note on the class.", _
Numbers := New Integer() { 53, 57, 59 })> _
Public Class Test
' The example attribute is applied to a method, using the
' parameterless constructor and supplying a named argument.
' The attribute is also applied to the method parameter.
'
<Example(Note:="This is a note on a method.")> _
Public Sub TestMethod(<Example()> ByVal arg As Object)
End Sub
' Sub Main gets objects representing the assembly, the test
' type, the test method, and the method parameter. Custom
' attribute data is displayed for each of these.
'
Public Shared Sub Main()
Dim asm As [Assembly] = Assembly.ReflectionOnlyLoad("source")
Dim t As Type = asm.GetType("Test")
Dim m As MethodInfo = t.GetMethod("TestMethod")
Dim p() As ParameterInfo = m.GetParameters()
Console.WriteLine(vbCrLf & "Attributes for assembly: '{0}'", asm)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm))
Console.WriteLine(vbCrLf & "Attributes for type: '{0}'", t)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(t))
Console.WriteLine(vbCrLf & "Attributes for member: '{0}'", m)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(m))
Console.WriteLine(vbCrLf & "Attributes for parameter: '{0}'", p)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(p(0)))
End Sub
Private Shared Sub ShowAttributeData( _
ByVal attributes As IList(Of CustomAttributeData))
For Each cad As CustomAttributeData _
In CType(attributes, IEnumerable(Of CustomAttributeData))
Console.WriteLine(" {0}", cad)
Console.WriteLine(" Constructor: '{0}'", cad.Constructor)
Console.WriteLine(" Constructor arguments:")
For Each cata As CustomAttributeTypedArgument _
In CType(cad.ConstructorArguments, IEnumerable(Of CustomAttributeTypedArgument))
ShowValueOrArray(cata)
Next
Console.WriteLine(" Named arguments:")
For Each cana As CustomAttributeNamedArgument _
In CType(cad.NamedArguments, IEnumerable(Of CustomAttributeNamedArgument))
Console.WriteLine(" MemberInfo: '{0}'", _
cana.MemberInfo)
ShowValueOrArray(cana.TypedValue)
Next
Next
End Sub
Private Shared Sub ShowValueOrArray(ByVal cata As CustomAttributeTypedArgument)
If cata.Value.GetType() Is GetType(ReadOnlyCollection(Of CustomAttributeTypedArgument)) Then
Console.WriteLine(" Array of '{0}':", cata.ArgumentType)
For Each cataElement As CustomAttributeTypedArgument In cata.Value
Console.WriteLine(" Type: '{0}' Value: '{1}'", _
cataElement.ArgumentType, cataElement.Value)
Next
Else
Console.WriteLine(" Type: '{0}' Value: '{1}'", _
cata.ArgumentType, cata.Value)
End If
End Sub
End Class
' This code example produces output similar to the following:
'
'Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
' [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
' Constructor: 'Void .ctor(Int32)'
' Constructor arguments:
' Type: 'System.Int32' Value: '8'
' Named arguments:
' [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
' MemberInfo: 'Boolean WrapNonExceptionThrows'
' Type: 'System.Boolean' Value: 'True'
' [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
' Constructor: 'Void .ctor(ExampleKind)'
' Constructor arguments:
' Type: 'ExampleKind' Value: '2'
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on the assembly.'
'
'Attributes for type: 'Test'
' [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
' Constructor: 'Void .ctor(ExampleKind, System.String[])'
' Constructor arguments:
' Type: 'ExampleKind' Value: '1'
' Array of 'System.String[]':
' Type: 'System.String' Value: 'String array argument, line 1'
' Type: 'System.String' Value: 'String array argument, line 2'
' Type: 'System.String' Value: 'String array argument, line 3'
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on the class.'
' MemberInfo: 'Int32[] Numbers'
' Array of 'System.Int32[]':
' Type: 'System.Int32' Value: '53'
' Type: 'System.Int32' Value: '57'
' Type: 'System.Int32' Value: '59'
'
'Attributes for member: 'Void TestMethod(System.Object)'
' [ExampleAttribute(Note = "This is a note on a method.")]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on a method.'
'
'Attributes for parameter: 'System.Object arg'
' [ExampleAttribute()]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
Opmerkingen
Deze methode biedt een alternatief voor de GetCustomAttributes methode die altijd kan worden gebruikt in de context Alleen weerspiegeling.
Zie ook
Van toepassing op
GetCustomAttributes(MemberInfo)
Retourneert een lijst CustomAttributeData met objecten die gegevens vertegenwoordigen over de kenmerken die zijn toegepast op het doellid.
public:
static System::Collections::Generic::IList<System::Reflection::CustomAttributeData ^> ^ GetCustomAttributes(System::Reflection::MemberInfo ^ target);public static System.Collections.Generic.IList<System.Reflection.CustomAttributeData> GetCustomAttributes(System.Reflection.MemberInfo target);static member GetCustomAttributes : System.Reflection.MemberInfo -> System.Collections.Generic.IList<System.Reflection.CustomAttributeData>Public Shared Function GetCustomAttributes (target As MemberInfo) As IList(Of CustomAttributeData)Parameters
- target
- MemberInfo
Het lid waarvan de kenmerkgegevens moeten worden opgehaald.
Retouren
Een lijst met objecten die gegevens vertegenwoordigen over de kenmerken die zijn toegepast op het doellid.
Uitzonderingen
target is null.
Voorbeelden
In het volgende voorbeeld wordt een aangepast kenmerk gedefinieerd met vier constructors en vier eigenschappen. Twee van de eigenschappen zijn alleen-lezen en worden ingesteld met behulp van de positionele parameters van de constructors. De andere twee eigenschappen zijn lezen/schrijven en kunnen alleen worden ingesteld met benoemde argumenten. Een positionele eigenschap is een matrix met tekenreeksen en één benoemde eigenschap is een matrix met gehele getallen.
Het kenmerk wordt toegepast op de assembly, op een type dat in de assembly is gedeclareerd, op een methode van het type en op een parameter van de methode. Voor deze gevallen worden verschillende constructors gebruikt. Wanneer de assembly wordt uitgevoerd, wordt de assembly geladen in de context alleen reflectie en worden de aangepaste kenmerken weergegeven.
Het kenmerk dat wordt toegepast op het type demonstreert matrixeigenschappen, met zowel positionele als benoemde argumenten.
De GetCustomAttributes methode wordt gebruikt Main() om de aangepaste kenmerken op te halen die zijn toegepast op een type en op een testmethode (Type afgeleid van MemberInfo). De retourwaarde van GetCustomAttributes wordt doorgegeven aan de ShowAttributeData methode.
using System;
using System.Reflection;
using System.Collections.Generic;
using System.Collections.ObjectModel;
// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind.ThirdKind, Note="This is a note on the assembly.")]
// An enumeration used by the ExampleAttribute class.
public enum ExampleKind
{
FirstKind,
SecondKind,
ThirdKind,
FourthKind
};
// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets.All)]
public class ExampleAttribute : Attribute
{
// Data for properties.
private ExampleKind kindValue;
private string noteValue;
private string[] arrayStrings;
private int[] arrayNumbers;
// Constructors. The parameterless constructor (.ctor) calls
// the constructor that specifies ExampleKind and an array of
// strings, and supplies the default values.
//
public ExampleAttribute(ExampleKind initKind, string[] initStrings)
{
kindValue = initKind;
arrayStrings = initStrings;
}
public ExampleAttribute(ExampleKind initKind) : this(initKind, null) {}
public ExampleAttribute() : this(ExampleKind.FirstKind, null) {}
// Properties. The Note and Numbers properties must be read/write, so they
// can be used as named parameters.
//
public ExampleKind Kind { get { return kindValue; }}
public string[] Strings { get { return arrayStrings; }}
public string Note
{
get { return noteValue; }
set { noteValue = value; }
}
public int[] Numbers
{
get { return arrayNumbers; }
set { arrayNumbers = value; }
}
}
// The example attribute is applied to the test class.
//
[Example(ExampleKind.SecondKind,
new string[] { "String array argument, line 1",
"String array argument, line 2",
"String array argument, line 3" },
Note="This is a note on the class.",
Numbers = new int[] { 53, 57, 59 })]
public class Test
{
// The example attribute is applied to a method, using the
// parameterless constructor and supplying a named argument.
// The attribute is also applied to the method parameter.
//
[Example(Note="This is a note on a method.")]
public void TestMethod([Example] object arg) { }
// Main() gets objects representing the assembly, the test
// type, the test method, and the method parameter. Custom
// attribute data is displayed for each of these.
//
public static void Main()
{
Assembly asm = Assembly.ReflectionOnlyLoad("Source");
Type t = asm.GetType("Test");
MethodInfo m = t.GetMethod("TestMethod");
ParameterInfo[] p = m.GetParameters();
Console.WriteLine("\r\nAttributes for assembly: '{0}'", asm);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm));
Console.WriteLine("\r\nAttributes for type: '{0}'", t);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(t));
Console.WriteLine("\r\nAttributes for member: '{0}'", m);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(m));
Console.WriteLine("\r\nAttributes for parameter: '{0}'", p);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(p[0]));
}
private static void ShowAttributeData(
IList<CustomAttributeData> attributes)
{
foreach( CustomAttributeData cad in attributes )
{
Console.WriteLine(" {0}", cad);
Console.WriteLine(" Constructor: '{0}'", cad.Constructor);
Console.WriteLine(" Constructor arguments:");
foreach( CustomAttributeTypedArgument cata
in cad.ConstructorArguments )
{
ShowValueOrArray(cata);
}
Console.WriteLine(" Named arguments:");
foreach( CustomAttributeNamedArgument cana
in cad.NamedArguments )
{
Console.WriteLine(" MemberInfo: '{0}'",
cana.MemberInfo);
ShowValueOrArray(cana.TypedValue);
}
}
}
private static void ShowValueOrArray(CustomAttributeTypedArgument cata)
{
if (cata.Value.GetType() == typeof(ReadOnlyCollection<CustomAttributeTypedArgument>))
{
Console.WriteLine(" Array of '{0}':", cata.ArgumentType);
foreach (CustomAttributeTypedArgument cataElement in
(ReadOnlyCollection<CustomAttributeTypedArgument>) cata.Value)
{
Console.WriteLine(" Type: '{0}' Value: '{1}'",
cataElement.ArgumentType, cataElement.Value);
}
}
else
{
Console.WriteLine(" Type: '{0}' Value: '{1}'",
cata.ArgumentType, cata.Value);
}
}
}
/* This code example produces output similar to the following:
Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
[System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
Constructor: 'Void .ctor(Int32)'
Constructor arguments:
Type: 'System.Int32' Value: '8'
Named arguments:
[System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'Boolean WrapNonExceptionThrows'
Type: 'System.Boolean' Value: 'True'
[ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
Constructor: 'Void .ctor(ExampleKind)'
Constructor arguments:
Type: 'ExampleKind' Value: '2'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the assembly.'
Attributes for type: 'Test'
[ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
Constructor: 'Void .ctor(ExampleKind, System.String[])'
Constructor arguments:
Type: 'ExampleKind' Value: '1'
Array of 'System.String[]':
Type: 'System.String' Value: 'String array argument, line 1'
Type: 'System.String' Value: 'String array argument, line 2'
Type: 'System.String' Value: 'String array argument, line 3'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the class.'
MemberInfo: 'Int32[] Numbers'
Array of 'System.Int32[]':
Type: 'System.Int32' Value: '53'
Type: 'System.Int32' Value: '57'
Type: 'System.Int32' Value: '59'
Attributes for member: 'Void TestMethod(System.Object)'
[ExampleAttribute(Note = "This is a note on a method.")]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on a method.'
Attributes for parameter: 'System.Object arg'
[ExampleAttribute()]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
*/
Imports System.Reflection
Imports System.Collections.Generic
Imports System.Collections.ObjectModel
' The example attribute is applied to the assembly.
<Assembly:Example(ExampleKind.ThirdKind, Note:="This is a note on the assembly.")>
' An enumeration used by the ExampleAttribute class.
Public Enum ExampleKind
FirstKind
SecondKind
ThirdKind
FourthKind
End Enum
' An example attribute. The attribute can be applied to all
' targets, from assemblies to parameters.
'
<AttributeUsage(AttributeTargets.All)> _
Public Class ExampleAttribute
Inherits Attribute
' Data for properties.
Private kindValue As ExampleKind
Private noteValue As String
Private arrayStrings() As String
Private arrayNumbers() As Integer
' Constructors. The parameterless constructor (.ctor) calls
' the constructor that specifies ExampleKind and an array of
' strings, and supplies the default values.
'
Public Sub New(ByVal initKind As ExampleKind, ByVal initStrings() As String)
kindValue = initKind
arrayStrings = initStrings
End Sub
Public Sub New(ByVal initKind As ExampleKind)
Me.New(initKind, Nothing)
End Sub
Public Sub New()
Me.New(ExampleKind.FirstKind, Nothing)
End Sub
' Properties. The Note and Numbers properties must be read/write, so they
' can be used as named parameters.
'
Public ReadOnly Property Kind As ExampleKind
Get
Return kindValue
End Get
End Property
Public ReadOnly Property Strings As String()
Get
Return arrayStrings
End Get
End Property
Public Property Note As String
Get
Return noteValue
End Get
Set
noteValue = value
End Set
End Property
Public Property Numbers As Integer()
Get
Return arrayNumbers
End Get
Set
arrayNumbers = value
End Set
End Property
End Class
' The example attribute is applied to the test class.
'
<Example(ExampleKind.SecondKind, _
New String() { "String array argument, line 1", _
"String array argument, line 2", _
"String array argument, line 3" }, _
Note := "This is a note on the class.", _
Numbers := New Integer() { 53, 57, 59 })> _
Public Class Test
' The example attribute is applied to a method, using the
' parameterless constructor and supplying a named argument.
' The attribute is also applied to the method parameter.
'
<Example(Note:="This is a note on a method.")> _
Public Sub TestMethod(<Example()> ByVal arg As Object)
End Sub
' Sub Main gets objects representing the assembly, the test
' type, the test method, and the method parameter. Custom
' attribute data is displayed for each of these.
'
Public Shared Sub Main()
Dim asm As [Assembly] = Assembly.ReflectionOnlyLoad("source")
Dim t As Type = asm.GetType("Test")
Dim m As MethodInfo = t.GetMethod("TestMethod")
Dim p() As ParameterInfo = m.GetParameters()
Console.WriteLine(vbCrLf & "Attributes for assembly: '{0}'", asm)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm))
Console.WriteLine(vbCrLf & "Attributes for type: '{0}'", t)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(t))
Console.WriteLine(vbCrLf & "Attributes for member: '{0}'", m)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(m))
Console.WriteLine(vbCrLf & "Attributes for parameter: '{0}'", p)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(p(0)))
End Sub
Private Shared Sub ShowAttributeData( _
ByVal attributes As IList(Of CustomAttributeData))
For Each cad As CustomAttributeData _
In CType(attributes, IEnumerable(Of CustomAttributeData))
Console.WriteLine(" {0}", cad)
Console.WriteLine(" Constructor: '{0}'", cad.Constructor)
Console.WriteLine(" Constructor arguments:")
For Each cata As CustomAttributeTypedArgument _
In CType(cad.ConstructorArguments, IEnumerable(Of CustomAttributeTypedArgument))
ShowValueOrArray(cata)
Next
Console.WriteLine(" Named arguments:")
For Each cana As CustomAttributeNamedArgument _
In CType(cad.NamedArguments, IEnumerable(Of CustomAttributeNamedArgument))
Console.WriteLine(" MemberInfo: '{0}'", _
cana.MemberInfo)
ShowValueOrArray(cana.TypedValue)
Next
Next
End Sub
Private Shared Sub ShowValueOrArray(ByVal cata As CustomAttributeTypedArgument)
If cata.Value.GetType() Is GetType(ReadOnlyCollection(Of CustomAttributeTypedArgument)) Then
Console.WriteLine(" Array of '{0}':", cata.ArgumentType)
For Each cataElement As CustomAttributeTypedArgument In cata.Value
Console.WriteLine(" Type: '{0}' Value: '{1}'", _
cataElement.ArgumentType, cataElement.Value)
Next
Else
Console.WriteLine(" Type: '{0}' Value: '{1}'", _
cata.ArgumentType, cata.Value)
End If
End Sub
End Class
' This code example produces output similar to the following:
'
'Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
' [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
' Constructor: 'Void .ctor(Int32)'
' Constructor arguments:
' Type: 'System.Int32' Value: '8'
' Named arguments:
' [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
' MemberInfo: 'Boolean WrapNonExceptionThrows'
' Type: 'System.Boolean' Value: 'True'
' [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
' Constructor: 'Void .ctor(ExampleKind)'
' Constructor arguments:
' Type: 'ExampleKind' Value: '2'
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on the assembly.'
'
'Attributes for type: 'Test'
' [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
' Constructor: 'Void .ctor(ExampleKind, System.String[])'
' Constructor arguments:
' Type: 'ExampleKind' Value: '1'
' Array of 'System.String[]':
' Type: 'System.String' Value: 'String array argument, line 1'
' Type: 'System.String' Value: 'String array argument, line 2'
' Type: 'System.String' Value: 'String array argument, line 3'
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on the class.'
' MemberInfo: 'Int32[] Numbers'
' Array of 'System.Int32[]':
' Type: 'System.Int32' Value: '53'
' Type: 'System.Int32' Value: '57'
' Type: 'System.Int32' Value: '59'
'
'Attributes for member: 'Void TestMethod(System.Object)'
' [ExampleAttribute(Note = "This is a note on a method.")]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on a method.'
'
'Attributes for parameter: 'System.Object arg'
' [ExampleAttribute()]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
Opmerkingen
Met deze methode worden aangepaste kenmerkgegevens opgehaald voor typen, geneste typen en typeleden, omdat de Type klasse en de klassen in de System.Reflection naamruimte die typeleden vertegenwoordigen allemaal zijn afgeleid van MemberInfo.
Zie ook
Van toepassing op
GetCustomAttributes(Module)
Retourneert een lijst CustomAttributeData met objecten die gegevens vertegenwoordigen over de kenmerken die zijn toegepast op de doelmodule.
public:
static System::Collections::Generic::IList<System::Reflection::CustomAttributeData ^> ^ GetCustomAttributes(System::Reflection::Module ^ target);public static System.Collections.Generic.IList<System.Reflection.CustomAttributeData> GetCustomAttributes(System.Reflection.Module target);static member GetCustomAttributes : System.Reflection.Module -> System.Collections.Generic.IList<System.Reflection.CustomAttributeData>Public Shared Function GetCustomAttributes (target As Module) As IList(Of CustomAttributeData)Parameters
- target
- Module
De module waarvan de aangepaste kenmerkgegevens moeten worden opgehaald.
Retouren
Een lijst met objecten die gegevens vertegenwoordigen over de kenmerken die zijn toegepast op de doelmodule.
Uitzonderingen
target is null.
Van toepassing op
GetCustomAttributes(ParameterInfo)
Retourneert een lijst CustomAttributeData met objecten die gegevens vertegenwoordigen over de kenmerken die zijn toegepast op de doelparameter.
public:
static System::Collections::Generic::IList<System::Reflection::CustomAttributeData ^> ^ GetCustomAttributes(System::Reflection::ParameterInfo ^ target);public static System.Collections.Generic.IList<System.Reflection.CustomAttributeData> GetCustomAttributes(System.Reflection.ParameterInfo target);static member GetCustomAttributes : System.Reflection.ParameterInfo -> System.Collections.Generic.IList<System.Reflection.CustomAttributeData>Public Shared Function GetCustomAttributes (target As ParameterInfo) As IList(Of CustomAttributeData)Parameters
- target
- ParameterInfo
De parameter waarvan de kenmerkgegevens moeten worden opgehaald.
Retouren
Een lijst met objecten die gegevens vertegenwoordigen over de kenmerken die zijn toegepast op de doelparameter.
Uitzonderingen
target is null.
Voorbeelden
In het volgende voorbeeld wordt een aangepast kenmerk gedefinieerd met vier constructors en vier eigenschappen. Twee van de eigenschappen zijn alleen-lezen en worden ingesteld met behulp van de positionele parameters van de constructors. De andere twee eigenschappen zijn lezen/schrijven en kunnen alleen worden ingesteld met benoemde argumenten. Een positionele eigenschap is een matrix met tekenreeksen en één benoemde eigenschap is een matrix met gehele getallen.
Het kenmerk wordt toegepast op de assembly, op een type dat in de assembly is gedeclareerd, op een methode van het type en op een parameter van de methode. Voor deze gevallen worden verschillende constructors gebruikt. Wanneer de assembly wordt uitgevoerd, wordt de assembly geladen in de context alleen reflectie en worden de aangepaste kenmerken weergegeven.
Het kenmerk dat wordt toegepast op het type demonstreert matrixeigenschappen, met zowel positionele als benoemde argumenten.
De GetCustomAttributes methode wordt gebruikt Main() om de aangepaste kenmerken op te halen die zijn toegepast op een parameter van een testmethode. De retourwaarde van GetCustomAttributes wordt doorgegeven aan de ShowAttributeData methode.
using System;
using System.Reflection;
using System.Collections.Generic;
using System.Collections.ObjectModel;
// The example attribute is applied to the assembly.
[assembly:Example(ExampleKind.ThirdKind, Note="This is a note on the assembly.")]
// An enumeration used by the ExampleAttribute class.
public enum ExampleKind
{
FirstKind,
SecondKind,
ThirdKind,
FourthKind
};
// An example attribute. The attribute can be applied to all
// targets, from assemblies to parameters.
//
[AttributeUsage(AttributeTargets.All)]
public class ExampleAttribute : Attribute
{
// Data for properties.
private ExampleKind kindValue;
private string noteValue;
private string[] arrayStrings;
private int[] arrayNumbers;
// Constructors. The parameterless constructor (.ctor) calls
// the constructor that specifies ExampleKind and an array of
// strings, and supplies the default values.
//
public ExampleAttribute(ExampleKind initKind, string[] initStrings)
{
kindValue = initKind;
arrayStrings = initStrings;
}
public ExampleAttribute(ExampleKind initKind) : this(initKind, null) {}
public ExampleAttribute() : this(ExampleKind.FirstKind, null) {}
// Properties. The Note and Numbers properties must be read/write, so they
// can be used as named parameters.
//
public ExampleKind Kind { get { return kindValue; }}
public string[] Strings { get { return arrayStrings; }}
public string Note
{
get { return noteValue; }
set { noteValue = value; }
}
public int[] Numbers
{
get { return arrayNumbers; }
set { arrayNumbers = value; }
}
}
// The example attribute is applied to the test class.
//
[Example(ExampleKind.SecondKind,
new string[] { "String array argument, line 1",
"String array argument, line 2",
"String array argument, line 3" },
Note="This is a note on the class.",
Numbers = new int[] { 53, 57, 59 })]
public class Test
{
// The example attribute is applied to a method, using the
// parameterless constructor and supplying a named argument.
// The attribute is also applied to the method parameter.
//
[Example(Note="This is a note on a method.")]
public void TestMethod([Example] object arg) { }
// Main() gets objects representing the assembly, the test
// type, the test method, and the method parameter. Custom
// attribute data is displayed for each of these.
//
public static void Main()
{
Assembly asm = Assembly.ReflectionOnlyLoad("Source");
Type t = asm.GetType("Test");
MethodInfo m = t.GetMethod("TestMethod");
ParameterInfo[] p = m.GetParameters();
Console.WriteLine("\r\nAttributes for assembly: '{0}'", asm);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm));
Console.WriteLine("\r\nAttributes for type: '{0}'", t);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(t));
Console.WriteLine("\r\nAttributes for member: '{0}'", m);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(m));
Console.WriteLine("\r\nAttributes for parameter: '{0}'", p);
ShowAttributeData(CustomAttributeData.GetCustomAttributes(p[0]));
}
private static void ShowAttributeData(
IList<CustomAttributeData> attributes)
{
foreach( CustomAttributeData cad in attributes )
{
Console.WriteLine(" {0}", cad);
Console.WriteLine(" Constructor: '{0}'", cad.Constructor);
Console.WriteLine(" Constructor arguments:");
foreach( CustomAttributeTypedArgument cata
in cad.ConstructorArguments )
{
ShowValueOrArray(cata);
}
Console.WriteLine(" Named arguments:");
foreach( CustomAttributeNamedArgument cana
in cad.NamedArguments )
{
Console.WriteLine(" MemberInfo: '{0}'",
cana.MemberInfo);
ShowValueOrArray(cana.TypedValue);
}
}
}
private static void ShowValueOrArray(CustomAttributeTypedArgument cata)
{
if (cata.Value.GetType() == typeof(ReadOnlyCollection<CustomAttributeTypedArgument>))
{
Console.WriteLine(" Array of '{0}':", cata.ArgumentType);
foreach (CustomAttributeTypedArgument cataElement in
(ReadOnlyCollection<CustomAttributeTypedArgument>) cata.Value)
{
Console.WriteLine(" Type: '{0}' Value: '{1}'",
cataElement.ArgumentType, cataElement.Value);
}
}
else
{
Console.WriteLine(" Type: '{0}' Value: '{1}'",
cata.ArgumentType, cata.Value);
}
}
}
/* This code example produces output similar to the following:
Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
[System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
Constructor: 'Void .ctor(Int32)'
Constructor arguments:
Type: 'System.Int32' Value: '8'
Named arguments:
[System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'Boolean WrapNonExceptionThrows'
Type: 'System.Boolean' Value: 'True'
[ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
Constructor: 'Void .ctor(ExampleKind)'
Constructor arguments:
Type: 'ExampleKind' Value: '2'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the assembly.'
Attributes for type: 'Test'
[ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
Constructor: 'Void .ctor(ExampleKind, System.String[])'
Constructor arguments:
Type: 'ExampleKind' Value: '1'
Array of 'System.String[]':
Type: 'System.String' Value: 'String array argument, line 1'
Type: 'System.String' Value: 'String array argument, line 2'
Type: 'System.String' Value: 'String array argument, line 3'
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on the class.'
MemberInfo: 'Int32[] Numbers'
Array of 'System.Int32[]':
Type: 'System.Int32' Value: '53'
Type: 'System.Int32' Value: '57'
Type: 'System.Int32' Value: '59'
Attributes for member: 'Void TestMethod(System.Object)'
[ExampleAttribute(Note = "This is a note on a method.")]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
MemberInfo: 'System.String Note'
Type: 'System.String' Value: 'This is a note on a method.'
Attributes for parameter: 'System.Object arg'
[ExampleAttribute()]
Constructor: 'Void .ctor()'
Constructor arguments:
Named arguments:
*/
Imports System.Reflection
Imports System.Collections.Generic
Imports System.Collections.ObjectModel
' The example attribute is applied to the assembly.
<Assembly:Example(ExampleKind.ThirdKind, Note:="This is a note on the assembly.")>
' An enumeration used by the ExampleAttribute class.
Public Enum ExampleKind
FirstKind
SecondKind
ThirdKind
FourthKind
End Enum
' An example attribute. The attribute can be applied to all
' targets, from assemblies to parameters.
'
<AttributeUsage(AttributeTargets.All)> _
Public Class ExampleAttribute
Inherits Attribute
' Data for properties.
Private kindValue As ExampleKind
Private noteValue As String
Private arrayStrings() As String
Private arrayNumbers() As Integer
' Constructors. The parameterless constructor (.ctor) calls
' the constructor that specifies ExampleKind and an array of
' strings, and supplies the default values.
'
Public Sub New(ByVal initKind As ExampleKind, ByVal initStrings() As String)
kindValue = initKind
arrayStrings = initStrings
End Sub
Public Sub New(ByVal initKind As ExampleKind)
Me.New(initKind, Nothing)
End Sub
Public Sub New()
Me.New(ExampleKind.FirstKind, Nothing)
End Sub
' Properties. The Note and Numbers properties must be read/write, so they
' can be used as named parameters.
'
Public ReadOnly Property Kind As ExampleKind
Get
Return kindValue
End Get
End Property
Public ReadOnly Property Strings As String()
Get
Return arrayStrings
End Get
End Property
Public Property Note As String
Get
Return noteValue
End Get
Set
noteValue = value
End Set
End Property
Public Property Numbers As Integer()
Get
Return arrayNumbers
End Get
Set
arrayNumbers = value
End Set
End Property
End Class
' The example attribute is applied to the test class.
'
<Example(ExampleKind.SecondKind, _
New String() { "String array argument, line 1", _
"String array argument, line 2", _
"String array argument, line 3" }, _
Note := "This is a note on the class.", _
Numbers := New Integer() { 53, 57, 59 })> _
Public Class Test
' The example attribute is applied to a method, using the
' parameterless constructor and supplying a named argument.
' The attribute is also applied to the method parameter.
'
<Example(Note:="This is a note on a method.")> _
Public Sub TestMethod(<Example()> ByVal arg As Object)
End Sub
' Sub Main gets objects representing the assembly, the test
' type, the test method, and the method parameter. Custom
' attribute data is displayed for each of these.
'
Public Shared Sub Main()
Dim asm As [Assembly] = Assembly.ReflectionOnlyLoad("source")
Dim t As Type = asm.GetType("Test")
Dim m As MethodInfo = t.GetMethod("TestMethod")
Dim p() As ParameterInfo = m.GetParameters()
Console.WriteLine(vbCrLf & "Attributes for assembly: '{0}'", asm)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(asm))
Console.WriteLine(vbCrLf & "Attributes for type: '{0}'", t)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(t))
Console.WriteLine(vbCrLf & "Attributes for member: '{0}'", m)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(m))
Console.WriteLine(vbCrLf & "Attributes for parameter: '{0}'", p)
ShowAttributeData(CustomAttributeData.GetCustomAttributes(p(0)))
End Sub
Private Shared Sub ShowAttributeData( _
ByVal attributes As IList(Of CustomAttributeData))
For Each cad As CustomAttributeData _
In CType(attributes, IEnumerable(Of CustomAttributeData))
Console.WriteLine(" {0}", cad)
Console.WriteLine(" Constructor: '{0}'", cad.Constructor)
Console.WriteLine(" Constructor arguments:")
For Each cata As CustomAttributeTypedArgument _
In CType(cad.ConstructorArguments, IEnumerable(Of CustomAttributeTypedArgument))
ShowValueOrArray(cata)
Next
Console.WriteLine(" Named arguments:")
For Each cana As CustomAttributeNamedArgument _
In CType(cad.NamedArguments, IEnumerable(Of CustomAttributeNamedArgument))
Console.WriteLine(" MemberInfo: '{0}'", _
cana.MemberInfo)
ShowValueOrArray(cana.TypedValue)
Next
Next
End Sub
Private Shared Sub ShowValueOrArray(ByVal cata As CustomAttributeTypedArgument)
If cata.Value.GetType() Is GetType(ReadOnlyCollection(Of CustomAttributeTypedArgument)) Then
Console.WriteLine(" Array of '{0}':", cata.ArgumentType)
For Each cataElement As CustomAttributeTypedArgument In cata.Value
Console.WriteLine(" Type: '{0}' Value: '{1}'", _
cataElement.ArgumentType, cataElement.Value)
Next
Else
Console.WriteLine(" Type: '{0}' Value: '{1}'", _
cata.ArgumentType, cata.Value)
End If
End Sub
End Class
' This code example produces output similar to the following:
'
'Attributes for assembly: 'source, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'
' [System.Runtime.CompilerServices.CompilationRelaxationsAttribute((Int32)8)]
' Constructor: 'Void .ctor(Int32)'
' Constructor arguments:
' Type: 'System.Int32' Value: '8'
' Named arguments:
' [System.Runtime.CompilerServices.RuntimeCompatibilityAttribute(WrapNonExceptionThrows = True)]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
' MemberInfo: 'Boolean WrapNonExceptionThrows'
' Type: 'System.Boolean' Value: 'True'
' [ExampleAttribute((ExampleKind)2, Note = "This is a note on the assembly.")]
' Constructor: 'Void .ctor(ExampleKind)'
' Constructor arguments:
' Type: 'ExampleKind' Value: '2'
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on the assembly.'
'
'Attributes for type: 'Test'
' [ExampleAttribute((ExampleKind)1, new String[3] { "String array argument, line 1", "String array argument, line 2", "String array argument, line 3" }, Note = "This is a note on the class.", Numbers = new Int32[3] { 53, 57, 59 })]
' Constructor: 'Void .ctor(ExampleKind, System.String[])'
' Constructor arguments:
' Type: 'ExampleKind' Value: '1'
' Array of 'System.String[]':
' Type: 'System.String' Value: 'String array argument, line 1'
' Type: 'System.String' Value: 'String array argument, line 2'
' Type: 'System.String' Value: 'String array argument, line 3'
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on the class.'
' MemberInfo: 'Int32[] Numbers'
' Array of 'System.Int32[]':
' Type: 'System.Int32' Value: '53'
' Type: 'System.Int32' Value: '57'
' Type: 'System.Int32' Value: '59'
'
'Attributes for member: 'Void TestMethod(System.Object)'
' [ExampleAttribute(Note = "This is a note on a method.")]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
' MemberInfo: 'System.String Note'
' Type: 'System.String' Value: 'This is a note on a method.'
'
'Attributes for parameter: 'System.Object arg'
' [ExampleAttribute()]
' Constructor: 'Void .ctor()'
' Constructor arguments:
' Named arguments:
Opmerkingen
Deze methode biedt een alternatief voor de GetCustomAttributes methode die altijd kan worden gebruikt in de context Alleen weerspiegeling.